Call Today

 

 

The publisher is making a number of great annotation regarding What Would Cause My Electric Water Heater to Stop Working? in general in this content underneath.

Many contemporary residences make use of an electric water heater for their heater, due to its benefit as well as convenience of use. However, much like any other electric devices, problems may develop with its use, unexpectedly. It can be really discouraging to awaken to a cool shower instead of a hot one or having your bath with water that isn't hot enough and even also warm. Whatever the case may be, water heater issues can be rather aggravating. Luckily, we have actually made a checklist of feasible solutions to your water heater issues. There are a number of elements that might cause a lot of these issues, it could be a problem with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you switch off the major power supply for safety and security. Whatever the problem is, getting it fixed should not pose too much of an issue if you follow these steps:

 

Call A Professional:

If after replacing all defective parts and resetting your temperature, the water heater still isn't working, you may require to call a professional plumber for an expert viewpoint. The issue with your heating unit could be that the hot and cold taps have been switched or it may be undersized for the quantity of warm water required in your house. Whatever the situation may be, a professional plumber would aid address the trouble.

 

Inspect Your Power Supply:

As fundamental as this may seem, it is very essential. Without ample power, your hot water heater will not function. So the first thing to do when your water suddenly retires is to validate that it isn't a power issue. Inspect if the fuse is blown out or the breaker stumbled. If the breaker is the issue, simply transform it on and off once again. Replace any kind of damaged or damaged fuse. Check the appliance with power after these adjustments to see if it's currently working.

 

Examine Your Thermostat:

If your water heater still isn't working or the water appearing isn't hot sufficient, you may require to inspect the temperature setups on your upper thermostat. Make certain the circuit breaker is turned off before doing anything. Open up the gain access to panel and press the red switch for temperature reset over the thermostat. This ought to aid warm the water. Transform the circuit breaker back on and also inspect if the problem has actually been fixed.

 

Check the Burner in the Water Heater:

If it's not a power trouble, after that try looking into your burner if it is still working. Check each of your heating elements to ensure the issue isn't with any of them. If any one of them is faulty, change that part and afterwards inspect whether the warm water is back on.

 

Conclusion

Hot water heater issues are not constantly major. Most of them are because of minor problems like a blown fuse or worn-out burner. Changing the malfunctioning components ought to suffice. Nevertheless, if you are still incapable to resolve the trouble, give a call to your closest plumber ahead to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Hopefully you liked our excerpt about What Would Cause My Electric Water Heater to Stop Working?. Thank you so much for finding the time to read through our piece of content. Are you aware of somebody else who is occupied with the topic? Please feel free to promote it. Kudos for your time. Come back soon.

Top Article